Projects. - In this article we will give you one electronic projects categorized using microcontroller 8051 application for thyristor power control by IR remote. Beside 8051 microcontroller, in this project also using IR remote TSOP 1738 module.
In here we will show you the Figure of electronic projects thyristor power control by IR remote based on 8051, global description, hardware and software requirement, and the last we will give you the link to continue your reading to official source.
In here we will show you the Figure of electronic projects thyristor power control by IR remote based on 8051, global description, hardware and software requirement, and the last we will give you the link to continue your reading to official source.
Electronic Project
Hardware and Software
- OP-Amp
- TRIAC
- Opto-isolator
- Resistors
- Capacitors
- Diodes
- LED
- Transformer
- Voltage Regulator
- 8051 series Microcontroller
- TSOP (IR sensor)
- 7 Segment Display
- TV remote
- Keil compiler
- Language: Embedded C or Assembly.
Description
The electronic projects like in Figure 1 above show you thyristor power control by IR remote based on 8051 microcontroller. In home automation application, convenience of remotely controlling the speed of the fan is achieved.
A standard TV remote sends coded infrared data to the control board, which is then received by an IR sensor (at the receiver end) interfaced to a microcontroller of 8051 family. Each time a button is pressed it sends a specific coded data in infrared range. This coded data is executed by the microcontroller to deliver delayed firing pulses to the thyristor controlled bridge through optical isolation.
The power to the load connected in series with the thyristor is controlled based on the received signal. Also the firing angle is displayed on a 7-segment display. A lamp load shall be provided in place of a motor whose varying intensity demonstrates the varying power to the motor for speed control. A lamp is provided in place of an induction motor for demonstration purpose.
And now you can continue your reading about the electronic projects thyristor power control by IR remote based on 8051 from original or official site using link HERE.
The power to the load connected in series with the thyristor is controlled based on the received signal. Also the firing angle is displayed on a 7-segment display. A lamp load shall be provided in place of a motor whose varying intensity demonstrates the varying power to the motor for speed control. A lamp is provided in place of an induction motor for demonstration purpose.
And now you can continue your reading about the electronic projects thyristor power control by IR remote based on 8051 from original or official site using link HERE.
0 comments:
Post a Comment