Projects. - In this article we will give you one electronic projects categorized using 8051 microcontroller and Android application for remote AC power control. Beside 8051 microcontroller, in this project also using LCD, SCR or thyristor.
In here we will show you the Figure of electronic projects Remote AC Power Control by Android Application with LCD Display, global description, hardware and software requirement, and the last we will give you the link to continue your reading to official source.
In here we will show you the Figure of electronic projects Remote AC Power Control by Android Application with LCD Display, global description, hardware and software requirement, and the last we will give you the link to continue your reading to official source.
Electronic Project
 |
| Figure 1. Remote AC Power Control by Android Application with LCD Display Projects (Source: www.edgefxkits.com) |
Hardware and Software
- 8051 series Microcontroller
- LM358
- Opto isolators
- SCRs
- Push Button
- Transformer
- Diodes
- Voltage Regulator
- Resistors
- Capacitors
- Crystal
- Lamp
- Bluetooth Device
- Keil compiler Languages:
- Embedded C or Assembly
- Android Application.
Description
The electronic projects like in Figure 1 above show you thyristor power control by IRemote AC Power Control by Android Application with LCD Display.
The project is designed to control AC power to a load by using firing angle control of thyristor. Efficiency of such power control is very high compared to any other method.
Remote operation is achieved by any smart-phone/Tablet etc., with Android OS, upon a GUI (Graphical User Interface) based touch screen operation. The project uses zero crossing point of the waveform which is detected by a comparator whose output is then fed to the microcontroller.
The microcontroller provides required delayed triggering control to a pair of SCRs through opto isolator interface.Finally the power is applied to the load through the SCRs in series.
And now you can continue your reading about the electronic projectsRemote AC Power Control by Android Application with LCD Display from original or official site using link HERE.
Remote operation is achieved by any smart-phone/Tablet etc., with Android OS, upon a GUI (Graphical User Interface) based touch screen operation. The project uses zero crossing point of the waveform which is detected by a comparator whose output is then fed to the microcontroller.
The microcontroller provides required delayed triggering control to a pair of SCRs through opto isolator interface.Finally the power is applied to the load through the SCRs in series.
And now you can continue your reading about the electronic projectsRemote AC Power Control by Android Application with LCD Display from original or official site using link HERE.
0 comments:
Post a Comment